Structure That Tell Stories . . .

Solar Mounting System

Solar Mounting System

Go Green Renewable has been founded by a young entrepreneur Mr. Ravi Shankar who has a great vision in achieving excellence in design, innovation & engineering.

Go Green Renewable

Ground Mounted System

Ground mounted as well as roof mounted structure solution designed to be adjusted to various tilt angle manually.

Go Green Renewable

Roof Mounted System

Roof mounted structure solution designed to be adjusted to various tilt angle manually.

Go Green Renewable

Elevated System

Green extrema is another go green design milestone which is a elevated roof top structure solution also called as superstructure.

Go Green Renewable

Solar Water Pump Structure

Go Green Renewable A Pioneer in Solar Industry for its unique and optimized solar mounting design & solution.

Ground Mounted System

Green Ultra

We at go green continuously try to make our structures at par with all rugged conditions of weather and the soil conditions, our go green team work continuously to monitor and design with every short and minute details of site to give our clients complete peace of mind keeping economics in mind.

Go Green Renewable

Single Pole Structure

Single Pole Structure can be used in numerous of Soil Conditions and vary to a wide range of structures for domains. These structures can be used Rajasthan to rocky soil in MP and hard dry soil. These are easy to install, Economic and robust, Rugged Design passes through all tests to give you complete peace of mind. These Comes in different type like C ON C, HAT ON C AND HAT ON HAT STRUCTURE. Preferred orientation is portrait but it is available in both landscape and portrait orientation. Foundation or ramming.

Go Green Renewable

Double pole structure

This type of structure is preferred in various types of soil conditions are not as normal types then Dual Pole type structures are used. However it also preferred to house more no of modules. The Dual Pole structure can readily house upto 180modules per table in landscape orientation and also an optimization of array configuration can be achieved.

Go Green Renewable
Go Green Renewable
Go Green Renewable
Go Green Renewable
  • Go Green Renewable
  • Go Green Renewable
  • Go Green Renewable
  • Go Green Renewable

SPECIAL FEATURES

  • Suitable for any terrain
  • Robust model to last long
  • Economical design
  • Easy in transportation & Installation
  • Fast installation design to save time and money
  • Best in class manufacturing facility and process
  • Optimized solution for better generation
  • Location, soil and wind data specific design and testing
  • Saves time and money
  • Elevation angle between 10 to 10 degrees or as per requirement for optimized array configuration
  • 5yrs warranty extendable upto 15yrs

TECHNICAL SPECIFICATION

  • The structure comprises of vertical post, rafter, bracings, purlin & gussat plate along with accessories
  • L Brackets connect the vertical rafter to horizontal rafter or the purlin as per the design, L Brackets are used specifically when the interacting component possess C Sections
  • Designed for wind speeds 120-200 Kmph
  • Orientation : Portrait/ Landscape
  • Ground Clearance 400 – 800 MM
  • Approximate mass of structure excluding the module weight 4.5 – 7 Kg/m2
  • Concrete consumption 80-100 M3/MWp
  • Orientation : Portrait/ Landscape
  • Galvanization : 
    • Post Hot Dipped – 80 -120μ
    • Pre Galvanized Ms 550gsm
    • Galvalume 150 Gsm
  • Yield Strength : 250 – 350 Mpa (ms), 550 Mpa ( Galvalume)

Ground Mounted System

Green Tilt

Go Green Renewable

GREEN TILT is a ground mounted as well as roof mounted structure solution designed to be adjusted to various tilt angle manually so that maximum generation can be achieved by changing the structural tilt angle seasonally or at least thrice during a year.

SPECIAL FEATURES

TECHNICAL SPECIFICATION

Ground Mounted System

Carport / Parking

This product comes under our Elevated Design, We at Go Green have a very good experience in Elevated type structure weather its roof or Ground our Team hadn't left any untouched area to cover. We here work to make your experience amazing with solar and your usable space. This part of our company is to make energy affordable and roboust by our design and solutions.

Go Green Renewable

These structures are design to have maximum stability factor while testing it virtually on numerous of Software tools to make it a ideal solution for our customers. Apart from this we give attention to various aspects of the design to make it light, Stable and definately light on your Pocket. Easy to install as the no of loose members are very few, you can assemple a whole 15KWp table in a single day along with modules.

SPECIAL FEATURES

  • Robust model to face any weather conditions
  • Can be installed in any soil conditions
  • Proper Civil foundation design to give you peace of mind
  • very few members to be fitted on site
  • Fast connecting members
  • All hardware's are of Hot Dipped Galvanized to give long Life
  • Assistance provided for INC of structures
  • So Easy to install that you can install 15KWp table in 1day with modules and other things
  • customized designs are available
  • Good aesthetics so can be used anywhere you need it

TECHNICAL SPECIFICATION

  • The structure comprises of trusses, beams vertical pillers, rafter, bracings, purlin & gussat plate along with accessories
  • The purlin are attached to trusses with the help of l brackets
  • Designed for wind speeds 150-200 Kmph
  • Orientation : Portrait/ Landscape
  • Ground Clearance 2m & max upto 4m
  •  Approximate mass of structure excluding the module weight 18to 25 Kg/m2
  • Chemical anchoring is provided
  • Orientation : Portrait/ Landscape
  • Galvanization : Post Hot Dipped 80microns to 120microns
  • Pre Galvanized MS 550gsm
  • Yield Strength : 250 to 350 Mpa (ms)
  • Customized design are provided as per the roof and client requirement

Roof Mounted System

Green Optima

Green Optima is a another design of Go Green which is a fixed roof top mounted type structure used mainly for KW roof top plants. Our Design is as designed so that it can economical, easy to install and can be used on any roof.

Go Green Renewable

Robust testing of the design is done with different design tools to give our client piece of mind. Complete structure is bolted and very easy to install so it is easy in transporting, stocking and installing. Green Optima is specifically designed for installation in small & constrained spaces and can be arranged in various configurations by iterating the structural components and their operative section types. Based on the type of design Green Optima can be categorized in two types : Single Pole Structure & Double pole structure

SPECIAL FEATURES

  • The structure comprises of vertical post, rafter, bracings, purlin & gussat plate
    along with accessories
  • L Brackets connect the vertical rafter to horizontal rafter or the purlin as per the
    design, L Brackets are used specifically when the interacting component
    possess C Sections
  • Designed for wind speeds 150-200 Kmph
  • Orientation : Portrait/ Landscape
  • Ground clearance 400 – 600 MM
  • Approximate mass of structure excluding the module weight 4.5 – 7 Kg/m2
  • Chemical anchoring is provided
  • Orientation : Portrait/ Landscape
  • Galvanization :
    • Post hot dipped – 80μ -120μ
    • Pre Galvanized Ms 550gsm
  • Yield Strength : 250 – 350 Mpa (ms)
  • Customized design are provided as per the roof and client requirement

TECHNICAL SPECIFICATION

Roof Mounted System

Green Klip

Green Klip solutions are designed to provide maximum flexibility in both design and installation for different trapezoidal-profile metal roofs. It require very few component or installation thus easy to install and economical also.

Go Green Renewable

Omega Clamp with clip

  • Omega clamp are member of structure which is fastned to the sheet roof profile with pop rivet
  • Epdm rubber is used for waterproofing as well as frictional agent
  • Silica sealent is used for more protection
  • It is designed to cater wind load of 140-200kmph
  • Module fastned with anodized aluminium clamps with ss fastners
  • Post galvanized steel/ aluminium is used
  • Tilt angle: parallel to roof

ORIENTATION : LANDSCAPE

Go Green Renewable

With HDG Steel/ Aluminium rails

  • This is used on roof with trapezoidal profile as well as for roof with detoriated condition or curved profiles
  • L brackets or strut chanel are provided for mounting modules along with epdm sheets
  • Self tapping screws are used to mount l brackets/ struts
  • Spring nuts, allen bolt and anodized aluminium clamps are used to mount modules on rails
  • Silica sealent are used for more protection
  • Post galvanized steel/ anodized aluminium rails used
  • Yield strength : 250-350mpa
  • Wind loading 140-200 kmph
  • Tilt angle : parallel to roof

ORIENTATION : LANDSCAPE/PORTRAIT

Go Green Renewable

Elevated Profile for additional Angles

These structures are basically used where the tin shed roof is at 0 degrees or have certain degree but we want to add more degrees. These are mostly made up of Aluminium which is connected to rails through holding clamps. The Rails are connected to the Shed purlin through self drilling screws and the other members are attached either by bolts or by rebits. This design is very robust and rugged to withstand any weather condition.

SPECIAL FEATURES

TECHNICAL SPECIFICATION

Roof Mounted System

Green Tilt

Go Green Renewable

GREEN TILT is a ground mounted as well as roof mounted structure solution designed to be adjusted to various tilt angle manually so that maximum generation can be achieved by changing the structural tilt angle seasonally or at least thrice during a year. The GREEN TILT has the following component and feature:

SPECIAL FEATURES

  • It consist of vertical post, vertical rafter and bracing which form a triangular support for the structure at required tilt angle
  • Bracing have a provision for multiple holes of which each holes corresponds to a specific tilt angle
  • Hinge mechanism is there which consist of hinge plates on which hinges are welded permitting mating of the hinges for free rotational motion also in single
    axis
  • CS purlins are used for better strength and ease of installation along with l brackets
  • Designed for wind speed of 140-180kmph
  • Orientation : portrait/ landscape
  • Tilt angle : optimal tilt angle can b provided as per the pv syst analysis
  • Ground clearance : 400-800mm
  • Hinge: post galvanized ms 80-120 μ yield strength : 250- 350mpa
  • Mounting structure : post galvanized 80-120μ pre galvanized 550 gsm coating yield strength : 250 -350 mpa

TECHNICAL SPECIFICATION

Elevated System

Green extrema is another go green design milestone which is a elevated roof top structure solution also called as superstructure. It mainly used for elevated rooftops or place where space is contrain and people want to use their roofs. Robust testing of structure is done before placing it on roofs with various design tools. Due to its nature it is a completely customized solution vary end to end use. It is further clasified in two parts

Go Green Renewable
  • The structure comprises of trusses, beams vertical pillers, rafter, bracings, purlin & gussat plate along with accessories
  • The purlin are attached to trusses with the help of l brackets
  • Designed for wind speeds 150-200 kmph
  • Orientation : portrait/ landscape
  • Ground clearance 2m, 4m
  • Approxiwate mass of structure excluding the module weight 18 25 kg/m2
  • Chemical anchoring is provided
  • Orientation : portrait/ landscape
  • Galvanization : post hot dipped , 80, -120
  • Pre galvanized ms 550gsm
  • Yield strength : 250, 350 mpa (ms)
  • Customized design are provided as per the roof and client requirement

SPECIAL FEATURES

TECHNICAL SPECIFICATION

Solar Water Pump Structure

Green Ultra

As the Government as well as a large sector in the industry are now focusing on the Rural India and if the Rural India comes in picture then Farming is the main occupation which come in mind and for farming Water is needed but as we all know that still after the 60 yrs of independence and inspite of a rural dominating population they are deprived of the basic need i.e. Electricity. As India is blessed with very good amount of radiation and sunny days today we and government is focusing of Solar water pump so we are are here to make India more brighter walking shoulder to shoulder with our Farmer brothers.

Go Green Renewable

Manual tracking structures

As we are experienced and pioneer in all type of structures, We at Go Green hadn't left any untouched area in the field of Mounting system. Our structures are Robust, Easy to Install, Easy to handle and Light on Pockets. to use more power of sun and help our farmers solar pumps are mostly made manual tracking type. We at Go Green had researched on lot of options of manual tracking to make the tracking more easy to install and handling and also to be light on pockets. Our structures are totally custom made as per the need of the customer.

SPECIAL FEATURES

TECHNICAL SPECIFICATION

How we Work

Go Green Renewable is the most impressive team you were Looking For

Go Green Renewable solar module mounting structure is designed and engineered to cater any specific site conditions. We at Go Green Renewable believe that every site is unique and adaptable to any terrain and conditions.

Get a Quote